l do not have the manual since it was missing at the dealership and have not received it in the mail yet. There are spare buttons that l was told can be set to my garage door and was wondering how to do that. Would love to get rid of my remote that is constantly falling off my visor! Anyone know?
Mine was the only '08 model at the dealership otherwise l would have the manual. the dealer thinks another seller misplaced it, no big deal...

Wait till you get the manual, different cars have different ways of setting up the remote

You bought that very expensive car w/o the manual??? The Dealer should have taken one out of another car or the parts dept. Anyway, there is a procedure that is unique with each car make and w/o that you will have to wait. If the Salesman is back from his trip to the Bahama is by now (from the commissions) Take it him and make him do it for you. He is the one who told you it would do it. Oh what if your code wont mate up with your brand opener???

You probably have rolling codes. If so,

1) press the two outer buttons on the in-car remote until u get a fast blink (this erases everything).

2) Then, press & hold the button u want to program & the remote control (that came with the door opener) at the same time.

3) Hold until the blink goes faster, then release.

4) Then -- & do not delay much here -- get to the door opener unit itself (box in the ceiling) find the button for training, press it, make sure a little light comes on.

5) Get back in ur car & press & hold the same button you've been programming again. Again wait until it flashes fast before u let go.

Should work now.

If u do not have rolling codes, steps 1-3 should suffice.

Some times the garage door opener is not strong enough to program it.this may be a problem. Be sure u get fresh batteries or try the other remote u get with the opener.

Steps:

1.)Grab a garage door remote.
2.)Hold in the Non-Set button on the Porsche
3.)At the same time hold in the main garage door opener button then wait 12Seconds
4.)Try it out!